Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 29 results ...
Al Shawa, B (2021) Achieving the climate change targets for the global buildings sector: a techno-socioeconomic pathway, Unpublished PhD Thesis, , University of Bath.
Azzouz, A (2018) Current perspectives and future directions of BIM assessment methods, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Bourdakis, V (1994) Performance appraisal of sportshall and swimming pool buildings in Greece, Unpublished PhD Thesis, , University of Bath.
Cusack, M M (1981) Time cost models: their use in decision making in the construction industry, with particular reference to the use of the microcomputer, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Du, Q (2009) Integrated decision-making in the cladding supply chain, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Dulaimi, M F (1991) Job behaviour of site managers: Its determinants and assessment, Unpublished PhD Thesis, , University of Bath.
Gale, A W (1994) Women in construction: An investigation into some of the aspects of image and knowledge as determinants of the under representation of women in construction management in the British construction industry, Unpublished PhD Thesis, , University of Bath.
Grist, E (2014) The implementation of innovative and sustainable construction materials, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Hampshire, P (2015) The development of an approach and decision support tool to inform sustainable roof selection, Unpublished PhD Thesis, School of Management, University of Bath.
Huang, X (2012) Estimating the cost of engineering services using parametrics and the bathtub failure model, Unpublished PhD Thesis, Department of Mechanical Engineering, University of Bath.
Hudson, R (2010) Strategies for parametric design in architecture: an application of practice-led research, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Jirojanakul, P (2000) The quality of life of construction workers' children in Bangkok Metropolis, Thailand, Unpublished PhD Thesis, , University of Bath.
Jobe, K (2017) A flexible housing approach for self-help housing in Botswana, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Joyce, S (2016) Performance driven design systems in practice, Unpublished PhD Thesis, , University of Bath.
Kunieda, Y (2017) Development of an impact assessment tool for demolition, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
- Type: Thesis
- Keywords: collaboration; communication; demolition; efficiency; environmental impact; landfill; project planning; recycling; simulation; stakeholders; UK; waste
- ISBN/ISSN:
- URL: https://researchportal.bath.ac.uk/en/studentthesis/development-of-an-impact-assessment-tool-for-demolition(4b40a183-d64f-4cca-afd7-bbd68b856e24).html
- Abstract:
Currently in the field of demolition, which generates most of the waste in the construction industry, the treatment of waste largely relies on landfill or degraded recycling, which leads to significant consumption of natural resource and energy and a shortage of landfill site. In order to improve the inefficiency of demolition waste recovery, “to suggest improvements in the environmental impact of the demolition industry in UK” was set as the aim of the present research. After the identification of few opportunities for communication between demolishers and constructers in the current social system, a collaboration support system between these two stakeholders called ‘Demolition Project Mapping’ (DPM) system was suggested. In the system, the impact evaluation tool developed in the 4D-CAD software is applied to the demolition project simulation. This tool allows the users to dynamically simulate the impact of project planning which can be designed in the tool. In the pilot study, the simulation result shows the large potential to reduce the impact (e.g. 28% for the cost) by the tool application.
Macchiarulo, V (2022) Integration of satellite radar interferometry and civil engineering procedures to assess building and infrastructure conditions, Unpublished PhD Thesis, , University of Bath.
Meese, N (2012) Knowledge sharing for sustainable development: a mixed-method study of an international civil engineering consultancy, Unpublished PhD Thesis, , University of Bath.
Mitchell, R (2020) The performance gap in new construction: evaluation of UK Passivhaus dwellings, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Mustapha, F H (1990) Who are the effective construction site managers and what skills do they bring to their work?, Unpublished PhD Thesis, , University of Bath.
Nisbet, P (1995) Dualism, flexibility and self-employment in the UK construction industry, Unpublished PhD Thesis, , University of Bath.
Orr, J (2012) Flexible formwork for concrete structures, Unpublished PhD Thesis, , University of Bath.
Osaily, Y (2021) Guidance for advancing demolition project management in the UK, Unpublished PhD Thesis, , University of Bath.
Powell, R (2012) Evaluating cognitive screening as a possible solution to reducing accidents and improving workplace productivity through early preventive detection of fatigue-impairment in the construction industry, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.
Root, D S (2001) The influence of professional and occupational cultures on project relationships mediated through standard forms and conditions of contract, Unpublished PhD Thesis, , University of Bath.
Smith, S (2003) Life cycle assessment of civil engineering projects, Unpublished PhD Thesis, , University of Bath.
Voyatzaki, M G (1996) An insight into the design process of unconventional structures, Unpublished PhD Thesis, , University of Bath.
Watson, N (2016) Developing material selection strategies to improve the embodied impacts of buildings, Unpublished PhD Thesis, , University of Bath.
Yin, X (2018) Development of straw bale building in northern China, Unpublished PhD Thesis, , University of Bath.
Zhang, X (2019) Integrating lean construction, BIM and quality: a new paradigm for the improvement of Chinese construction quality, Unpublished PhD Thesis, Department of Architecture & Civil Engineering, University of Bath.